When I first installed an aftermarket ECU (Megasquirt I) in my 1984 300ZX, years ago (almost 10 as of this writing!), I used the recommended GM sensor for coolant temperature. It required a bit of machining to fit the sensor, nothing major.
With my latest engine (and the two cars it was in), I decided to use the OEM Cylinder Head Temperature Sensor, since hey, why not? It was already there, in an optimal spot. All I had to do was make software changes to calibrate MS-II to it’s temperature/resistance curve. I had the data in the Factory Service Manual, all was well. Continue reading
Well, I’ve only been working on it a little so far, but I suppose it’s good enough to post about at this point.
The site is msqur.com, and it’s for Megasquirt ECU users to share their tunes (from the TunerStudio MS software). You can upload (multiple) .msq files, assign some engine information to them at upload, and share them with other people for troubleshooting or tuning help. The goal is to make something easier than attaching a file to a forum post that others have to download and fire up the full tuning software suite to just view it.
Currently, as of this posting, it just shows you the VE, Spark and AFR tables from MS2 or MS2-Extra only. It might with with other firmwares but I have no expanded it yet. You can also enable or disable the table coloring, and normalize the VE table, converting any VE table to 5-250 VE for ease of comparison. I hope to expand it to view all data available from the MSQ file in a familiar format.
I only get to work a bit each week on it, since I’ve got a few other projects going. But it shouldn’t take too long to get this site to 90%. It’s also a nice break from the C code for the DRD project. So, I’ll post every now and then about any updates to it, so check the msqur tag for the latest info.